Pumps - hose pumps

的信徒del hose pumps (65-2100)

Arrange a demo

Overview

的信徒del hose pumps (65-2100)

的信徒del hose pumps have no valves or seals to leak, clog or replace and provide flow rates to 108,000 L/h and pressures to 16 bar.

They can pump viscous and abrasive slurries, pastes and sludge, with up to 80 % solids in suspension.

Unlike other pump types, the highly abrasive nature of grit-filled sludge or lime slurry in the environmental market, does not affect peristaltic hose pump life.

的信徒del hose pumps eliminate ancillary equipment such as dry run protection, seal water flush systems and in-line check valves. They are also reversible to flush lines.

Chemical Compatibility Guide

Features and benefits

Dry running and self-priming
No seals, ball-checks, diaphragms, glands, immersed rotors, stators or pistons to leak, clog, corrode or replace
Handles abrasive slurries, corrosive acids, gaseous liquids
No slippage, allowing true positive displacement for accurate, repeatable metering
No ancillary equipment, check valves, sealing water flush systems or run-dry protection required
Fully reversible to blow out suction and drain lines safely

Technical summary

Max. flow rate continuous	72000 L/h
Max. flow rate continuous	18997 USGPH
Volume per revolution	6.7 - 40 L
Max. continuous operating speed	30 - 50 rpm
Max. operating pressure	16 bar
Max. operating pressure	232 psi
Min. starting torque	1150 - 5300 N m
Min. starting torque	10178 - 46,908 in/lbs
Weight	558 - 5,985 kg

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

的信徒del 65 performance

的信徒del 80 performance

的信徒del 100 performance

的信徒del 265 performance

Bredel 280performance

的信徒del 2100 performance

Specifications

Technical specifications

	的信徒del 65	的信徒del 80	的信徒del 100	的信徒del 265	Bredel 280	的信徒del 2100
Max. flow rate continuous	20100 L/h	28080 L/h	36000 L/h	40200 L/h	56160 L/h	72000 L/h
Max. flow rate continuous	5303 USGPH	7409 USGPH	9499 USGPH	10607 USGPH	14818 USGPH	18997 USGPH
Max. flow rate intermittent	32160 L/h	42120 L/h	60000 L/h	64320 L/h	84240 L/h	108000 L/h
Max. flow rate intermittent	8485 USGPH	11113 USGPH	15831 USGPH	16971 USGPH	22227 USGPH	28496 USGPH
Volume per revolution	6.7 L	11.7 L	20 L	13.4 L	23.4 L	40 L
Volume per revolution	1.77 USG	3.09 USG	5.28 USG	3.54 USG	6.18 USG	10.57 USG
Max. continuous operating speed	50 rpm	40 rpm	30 rpm	50 rpm	40 rpm	30 rpm
Max. intermittent operating speed	80 rpm	60 rpm	50 rpm	80 rpm	60 rpm	45 rpm
Max. operating pressure	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar
Max. operating pressure	232 psi	232 psi	232 psi	232 psi	232 psi	232 psi
Max. inlet pressure	2 bar abs	1.5 bar abs	1.5 bar abs	2 bar abs	1.5 bar abs	1.5 bar abs
Max. inlet pressure	30 psia	23 psia	23 psia	30 psia	23 psia	23 psia
Operating temperature range	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C
Operating temperature range	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F
Fluid temperature range	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C
Fluid temperature range	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F
Min. starting torque	1150 N m	2000 N m	3100 N m	2000 N m	3400 N m	5300 N m
Min. starting torque	10178 in/lbs	17701 in/lbs	27437 in/lbs	17701.5 in/lbs	30092 in/lbs	46908 in/lbs
Weight	558 kg	930 kg	1300 kg	2780 kg	4295 kg	5985 kg
Weight	1230 lbs	2050 lbs	2866 lbs	6129 lbs	9469 lbs	13195 lbs
Hose lubricant required	20 L	40 L	60 L	40 L	80 L	120 L
Hose lubricant required	5.28 USG	10.57 USG	15.85 USG	10.57 USG	21.13 USG	31.7 USG
Port configurations	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up
Compatible hose materials	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance
Flange assembly type	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS

Please consult your Bredel representative for lower or higher temperature operation. Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

的信徒del 65 dimensions

Type	A	B	C	D	E	F	G	H	H1	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R	S
的信徒del 65 (mm)	1059	580	3	746	152	680	740	1036	525	104	137	1172	141	486	415	220	50	18	18	145	4
的信徒del 65 (inches)	41.7	22.8	0.12	29.4	6	26.8	29.1	40.8	20.7	4.1	5.4	46.1	5.6	19.1	16.3	8.7	2	0.71	0.71	5.7	0.16

Connector sizes	ANSI 150#	EN DIN	JIS
的信徒del 65	2.5"	65mm	65mm

的信徒del 80 dimensions

Type	A	B	C	D	E	F	G	H	H1	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R	S
的信徒del 80 (mm)	1257	700	4	876	182	900	990	1218	620	124	153	1351	166	582	525	275	50	22	18	160	8
的信徒del 80 (inches)	49.5	27.6	0.16	34.5	7.2	35.4	39	48	24.4	4.9	6	53.2	6.5	22.9	20.7	10.8	2	0.9	0.71	6.3	0.31

Connector sizes	ANSI 150#	EN DIN	JIS
的信徒del 80	3"	80mm	80mm

的信徒del 100 dimensions

Type	A	B	C	D	E	F	G	H	H1	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R	S
的信徒del 100 (mm)	1468	813	3	1042	199	1050	1140	1415	720	151	173	1392	200	489	540	310	50	22	18	180	8
的信徒del 100 (inches)	57.8	32	0.12	41	7.8	41.3	44.9	55.7	28.3	5.9	6.8	54.8	7.9	19.3	21.3	12.2	2	0.9	0.71	7.1	0.31

Connector sizes	ANSI 150#	EN DIN	JIS
的信徒del 100	4"	100mm	100mm

的信徒del 265 dimensions

Type	A1	A2	B	C	D	E	F	G	H	ØQ	R	S
的信徒del 265 (mm)	*	1115	580	3	746	152	720	943	1036	18	145	4
的信徒del 265 (inches)	*	43.9	22.8	0.12	29.4	5.99	28.3	37.1	40.8	0.71	5.7	0.16

Bredel 280dimensions

Type	A1	A2	B	C	D	E	F	G	H	ØQ	R	S
Bredel 280(mm)	*	1404	700	4	876	182	800	1047	1218	18	160	8
Bredel 280(inches)	*	55.3	27.6	0.16	34.5	7.2	31.5	41.2	48	0.71	6.3	0.31

的信徒del 2100 dimensions

Type	A1	A2	B	C	D	E	F	G	H	ØQ	R	S
的信徒del 2100 (mm)	*	1516	813	3	1042	199	916	1218	1415	18	180	8
的信徒del 2100 (inches)	*	59.7	32	0.12	41	7.8	36.1	48	55.7	0.71	7.1	0.31

Materials of construction

Hose material	Bioprene, CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance
Housing	Cast iron, ISO12944 category C4M
Rotor assembly	Cast iron, ISO12944 category C4M
Cover assembly	Cast iron, ISO12944 category C4M
Brackets and fasteners	Galvanised steel, Stainless steel 316
Support frame	Galvanised steel, Stainless steel 316
Hose clamps	Galvanised steel, Stainless steel 316
Seals	Neoprene, Nitrile