Pumps - hose pumps

Bredel DuCoNite® pumps

Arrange a demo
Arrange a demo

Overview

Bredel DuCoNite pumps

Bredel DuCoNite® pumps with a paint-free electroplated housing which protects against corrosive and caustic fluids and atmospheres. The DuCoNite® pump is used for the most challenging applications. A high-tech surface protection method has rendered the pump ultra-resistant to aggressive liquids. The DuCoNite® hose pumps are available in five pump sizes - with capacities up to 5,250 L/h and pressures up to 16 bar.

The DuCoNite® hose pump reliably handles a variety of harsh materials, such as sodium hypochlorite, titanium dioxide, sodium hydroxide, catalytic agents, sulfuric acid, lime slurry, acidic liquids, solvents and resins.

Chemical Compatibility Guide

Features and benefits

  • Dry running and self-priming
  • Suction capability up to 9.5 mWC (374 inWC)
  • Simple hose change decreases cost of ownership, downtime and need for parts inventory
  • “Beyond the hose” protection against common water and waste water treatment chemicals
  • Paint-free pump housing perfect for wash-down in the food industry
  • No slippage, allowing true positive displacement for accurate, repeatable metering
  • No ancillary equipment, check valves, sealing water flush systems or run-dry protection required
  • Fully reversible to blow out suction and drain lines safely

Technical summary

Max。flow rate continuous 3200 L/h
Max。flow rate continuous 844 USGPH
Volume per revolution 0.022 - 0.625 L
Max。continuous operating speed 65 - 100 rpm
Max。operating pressure 16 bar
Max。operating pressure 232 psi
Min. starting torque 47 - 210 N m
Min. starting torque 416 - 1,859 in/lbs
Weight 30 - 130 kg

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Share

Performance

DuCoNite10 performance

DuCoNite15 performance

DuCoNite20 performance

DuCoNite25 performance

DuCoNite32 performance

Specifications

Technical specifications

DuCoNite10 DuCoNite15 DuCoNite20 DuCoNite25 DuCoNite32
Max。flow rate continuous 105 L/h 375 L/h 600 L/h 1800 L/h 3200 L/h
Max。flow rate continuous 28 USGPH 99 USGPH 158年USGPH 475 USGPH 844 USGPH
Max。flow rate intermittent 160 L/h 525 L/h 820 L/h 2740 L/h 5250 L/h
Max。flow rate intermittent 42 USGPH 139 USGPH 216 USGPH 723 USGPH 1385 USGPH
Volume per revolution 0.022 L 0.083 L 0.152 L 0.3 L 0.625 L
Volume per revolution 0.0058 USG 0.0219 USG 0.0402 USG 0.079 USG 0.165 USG
Max。continuous operating speed 80 rpm 75 rpm 65 rpm 100 rpm 86 rpm
Max。intermittent operating speed 120 rpm 105 rpm 90 rpm 155 rpm 140 rpm
Max。operating pressure 12 bar 12 bar 10 bar 16 bar 16 bar
Max。operating pressure 174 psi 174 psi 145 psi 232 psi 232 psi
Suction pressure 0.05 bar abs 0.05 bar abs 0.05 bar abs 0.05 bar abs 0.05 bar abs
Suction pressure 0.73 psi abs 0.73 psi abs 0.73 psi abs 0.73 psi abs 0.73 psi abs
Max。进口压力 2 bar abs 2 bar abs 2 bar abs 3.5 bar abs 3 bar abs
Max。进口压力 30 psi abs 30 psi abs 30 psi abs 51 psi abs 44 psi abs
Max。suction capability 9.5 mWC 9.5 mWC 9.5 mWC 9.5 mWC 9.5 mWC
Max。suction capability 374 inWC 374 inWC 374 inWC 374 inWC 374 inWC
Operating temperature range -20 to 45 °C -20 to 45 °C -20 to 45 °C -20 to 45 °C -20 to 45 °C
Operating temperature range -4 to 113 °F -4 to 113 °F -4 to 113 °F -4 to 113 °F -4 to 113 °F
Fluid temperature range -20 to 80 °C -20 to 80 °C -20 to 80 °C -20 to 80 °C -20 to 80 °C
Fluid temperature range -4 to 176 °F -4 to 176 °F -4 to 176 °F -4 to 176 °F -4 to 176 °F
Min. starting torque 47 N m 60 N m 85 N m 115牛米 210 N m
Min. starting torque 416 in/lbs 531 in/lbs 752 in/lbs 1018 in/lbs 1859 in/lbs
Weight 30 kg 45 kg 45 kg 90 kg 130 kg
Weight 66 lbs 99 lbs 99 lbs 198 lbs 287 lbs
Hose lubricant required 0.5 L 1 L 1 L 2.5 L 4.5 L
Hose lubricant required 0.13 USG 0.26 USG 0.26 USG 0.66 USG 1.19 USG
Port configurations Down, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up
Compatible hose materials CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR-Metering, NR-Transfer
Flange assembly type ANSI, DIN ANSI, DIN ANSI, DIN ANSI, DIN ANSI, DIN
Please consult your Bredel representative for lower or higher temperature operation. Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

DuCoNite10 dimensions

Type A A1 B C D ØE F G H H1 H2max J K Lmax L1 L2max M N O ØP
DuCoNite 10 (mm) 337 311 171 62 116 16 235 265 225 127 254 78 51 501 46 378 150 65 25 12
DuCoNite 10 (inches) 13.3 12.2 6.7 2.44 4.6 16mm 9.3 10.4 8.9 5.0 10.0 3.1 2 19.7 1.8 14.9 5.9 2.6 1.0 12mm
Connector sizes ANSI 150# EN DIN JIS
DuCoNite 10 0.5” 10mm 10mm

DuCoNite15 dimensions

Type A A1 B C D ØE F G H H1 H2max J K Lmax L1 L2max M N O ØP
DuCoNite 15 (mm) 427 431 230 63 195 20 285 315 304 167 294 82 61 505 46 378 150 75 25 12
DuCoNite 15 (inches) 16.8 17.0 9.1 2.5 7.7 20mm 11.2 12.4 12.0 6.6 11.6 3.2 2.4 19.9 1.8 14.9 5.9 3.0 1.0 12mm
Connector sizes ANSI 150# EN DIN JIS
DuCoNite 15 0.75” 20mm 20mm

DuCoNite20 dimensions

Type A A1 B C D ØE F G H H1 H2max J K Lmax L1 L2max M N O ØP
DuCoNite 20 (mm) 427 431 230 63 195 20 285 315 304 167 294 82 61 505 46 378 150 75 25 12
DuCoNite 20 (inches) 16.8 17.0 9.1 2.5 7.7 20mm 11.2 12.4 12.0 6.6 11.6 3.2 2.4 19.9 1.8 14.9 5.9 3.0 1.0 12mm
Connector sizes ANSI 150# EN DIN JIS
DuCoNite 20 0.75” 20mm 20mm

DuCoNite25 dimensions

Type A B C D E F G H H1 H2max J K Lmax L1 L2max M N O ØP ØQ R
DuCoNite 25 (mm) 521 304 2.5 264 98 279 315 460 222 359 66 97 592 58 468 305 120 15 12 14 85
DuCoNite 25 (inches) 20.5 12 0.09 10.4 3.9 11 12.4 18.1 8.7 14.1 2.6 3.8 23.3 2.3 18.4 12 4.7 0.6 0.47 0.6 3.3
Connector sizes ANSI 150# EN DIN JIS
DuCoNite 25 1" 25mm 25mm

DuCoNite32 dimensions

Type A B C D E F G H H1 H2max J K Lmax L1 L2max M N O ØP ØQ R
DuCoNite 32 (mm) 631 375 2.5 330 105 324 360 538 260 402 72 93 684 68 544 370 120 20 12 18 100
DuCoNite 32 (inches) 24.8 14.8 0.09 13 4.1 12.8 14.2 21.2 10.2 15.8 2.8 3.7 26.9 2.7 21.4 14.6 4.7 0.79 0.47 0.71 3.94
Connector sizes ANSI 150# EN DIN JIS
DuCoNite 32 1.25"/1.5" 32mm 32mm

Materials of construction

Hose material CSM, EPDM, F-NBR, Natural rubber (NR), NBR, NBR for food, NR-Metering, NR-Transfer
Housing Cast iron with DuCoNite surface treatment
Rotor assembly Cast iron with DuCoNite surface treatment
Cover assembly Cast iron with DuCoNite surface treatment
Brackets and fasteners Stainless steel 316
Support frame Stainless steel 316
Hose clamps Stainless steel 316
Coupling bush Alloy steel
Seals EPDM, Viton®

Literature

Brochures

  1. Bredel pumps (EN).pdf
    PDF - 2.2mb

Datasheet

  1. Bredel DuCoNite 10 datasheet (EN).pdf
    PDF - 999kb
  2. Bredel DuCoNite 15 datasheet (EN).pdf
    PDF - 1011.9kb
  3. Bredel DuCoNite 20 datasheet (EN).pdf
    PDF - 1.2mb
  4. Bredel DuCoNite 25 datasheet (EN).pdf
    PDF - 1.1mb
  5. Bredel DuCoNite 32 datasheet (EN).pdf
    PDF - 1.2mb

Manuals

  1. Bredel 10, 15, 20 DuCoNite manual (EN).pdf
    PDF - 822.8kb
  2. Bredel 25, 32 DuCoNite manual (EN).pdf
    PDF - 1mb

Recommended Products

  1. CSM hose

    CSM hose

    CSM hose elements. Outstanding resistance to strong, oxidising products and concentrated acids and bases.

    Hose pump elements

  2. Buna N (NBR) hose

    Buna N (NBR) hose

    Buna N (NBR) hose elements. Resistant to oils, greases, alkalis and detergents.

    Hose pump elements

  3. EPDM hose

    EPDM hose

    EPDM hose elements. Excellent chemical resistance, especially to ketones, alcohols and concentrated acids.

    Hose pump elements

Related Products

  1. APEX hose pumps

    APEX hose pumps

    Flow rates to 6,200 L/h (27.3 USGPM) and pressures up to 8 bar (116 psi). Optimised for process uptime.

    Pumps - hose pumps

  2. Bredel hose pumps (10-50)

    Bredel hose pumps (10-50)

    Flow rates to 17,520 L/h (4,623 USGPH) and pressures up to 16 bar (232 psi). Eliminate ancillary equipment.

    Pumps - hose pumps

  3. Bredel hose pumps (65-2100)

    Bredel hose pumps (65-2100)

    Flow rates to 108,000 L/h (475 GPM) and pressures up to 16 bar (232 psi). Eliminate ancillary equipment.

    Pumps - hose pumps

Our process pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts