530 process pumps
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Tubing - peristaltic
Marprene process tubing
Overview
Marprene long life process tubing
Marprene is a long life thermoplastic elastomer with resistance to a wide range of chemicals. Marprene is highly resistant to oxidising agents such as ozone, peroxides and sodium hypochlorite.
Marprene is Watson-Marlow's exclusive thermoplastic elastomer peristaltic pump tubing. It lasts at least 10 times as long as tubing in other materials. Long-life tubing means stoppages for a tube change are rare events, easily fitted in with general maintenance.
Always our first recommendation, Marprene has wide chemical compatibility, and is highly resistant to oxidising agents such as ozone, peroxides and sodium hypochlorite. Marprene is beige and opaque to visible and ultraviolet light, with low permeability to oxygen, carbon dioxide and nitrogen. It meets USDA standards for food handling.
Features and benefits
- Colour/transparency Beige/opaque
- Spallation Fair
- Certification FDA regulations 21 CFR177.2600, NSF/ANSI 61 for contact with aqueous food
- Operating temperature °C to °C
- Available in thirty different bore sizes, five wall thicknesses and three coil lengths, including bulk reels which provide cost savings
- Also suitable in Loadsure elements.
Technical summary
| Spallation | Fair |
| Certification | FDA 21CFR177.2600 |
| Shelf life | 5 years |
| Autoclave stability | 121 °C 30 minutes |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Specifications
Technical specifications
| Marprene | |
| Bore size | 0.5 - 25.4 mm |
| Bore size | 0.02 - 1 in |
| Wall thickness | 1.6 - 4.8 mm |
| Wall thickness | 0.0625 - 0.1875 in |
| Length | 3 - 152 m |
| Colour | Beige |
| Transparency | Opaque |
| Spallation | Fair |
| Certification | FDA 21CFR177.2600 |
| Operating temperature range | 5到80°C |
| Operating temperature range | 41 to 176 °F |
| Hardness, shore A (5sec) | 62-68 |
| Specific gravity | 0.95-0.98 g/ml |
| UV resistance | Excellent |
| Ultimate tensile strength | 55-690 bar |
| Ultimate tensile strength | >798 psi |
| Elongation at break | 340-600 % |
| Tensile stress at 100% elongation | 1.9-3.0 Mpa |
| Gas permeability rating | Fair |
| Water absorption | Low |
| Shelf life | 5 years |
| Autoclave stability | 121 °C 30 minutes |
Materials of construction
| Tubing | Thermoplastic elastomer |
Literature
Brochures
Tubing overview (EN).pdf
PDF - 841.6kb
Datasheet
Marprene datasheet (EN).pdf
PDF - 210.1kb
生产
生产
Marprene is Watson-Marlow's exclusive thermoplastic elastomer peristaltic pump tubing. It lasts at least 10 times as long as tubing in other materials. Long-life tubing means stoppages for a tube change are rare events, easily fitted in with general maintenance.
Always our first recommendation, Marprene has wide chemical compatibility, and is highly resistant to oxidising agents such as ozone, peroxides and sodium hypochlorite. Marprene is beige and opaque to visible and ultraviolet light, with low permeability to oxygen, carbon dioxide and nitrogen. It meets USDA standards for food handling.
Order Information
箴duct codes
Marprene product codes
| Tube ordering codes | ||||||
|---|---|---|---|---|---|---|
| Bore | Wall | Coil size | ||||
| mm | inch | mm | inch | 15m/50ft | 5m/16ft | 152m/500ft |
| 0.5 | 1/50 | 1.6 | 1/16 | 902.0005.016 | 902.0005.J16 | 902.0005.R16 |
| 0.8 | 1/32 | 1.6 | 1/16 | 902.0008.016 | 902.0008.J16 | 902.0008.R16 |
| 1.6 | 1/16 | 1.6 | 1/16 | 902.0016.016 | 902.0016.J16 | 902.0016.R16 |
| 2.4 | 3/32 | 1.6 | 1/16 | 902.0024.016 | 902.0024.J16 | 902.0024.R16 |
| 3.2 | 1/8 | 1.6 | 1/16 | 902.0032.016 | 902.0032.J16 | 902.0032.R16 |
| 4.8 | 3/16 | 1.6 | 1/16 | 902.0048.016 | 902.0048.J16 | 902.0048.R16 |
| 6.4 | 1/4 | 1.6 | 1/16 | 902.0064.016 | 902.0064.J16 | 902.0064.R16 |
| 122m/400ft | ||||||
| 8.0 | 5/16 | 1.6 | 1/16 | 902.0080.016 | 902.0080.J16 | 902.0080.R16 |
| 152m/500ft | ||||||
| 1.6 | 1/16 | 2.4 | 3/32 | 902.0016.024 | 902.0016.J24 | 902.0016.R24 |
| 3.2 | 1/8 | 2.4 | 3/32 | 902.0032.024 | 902.0032.J24 | 902.0032.R24 |
| 122m/400ft | ||||||
| 4.8 | 3/16 | 2.4 | 3/32 | 902.0048.024 | 902.0048.J24 | 902.0048.R24 |
| 91m/300ft | ||||||
| 6.4 | 1/4 | 2.4 | 3/32 | 902.0064.024 | 902.0064.J24 | 902.0064.R24 |
| 61m/200ft | ||||||
| 8.0 | 5/16 | 2.4 | 3/32 | 902.0080.024 | 902.0080.J24 | 902.0080.R24 |
| 46m/150ft | ||||||
| 9.6 | 3/8 | 2.4 | 3/32 | 902.0096.024 | 902.0096.J24 | 902.0096.R24 |
| 3m/10ft | 61m/200ft | |||||
| 6.4 | 1/4 | 3.2 | 1/8 | 902.0064.032 | 902.0064.I32 | 902.0064.R32 |
| 46m/150ft | ||||||
| 9.6 | 3/8 | 3.2 | 1/8 | 902.0096.032 | 902.0096.I32 | 902.0096.R32 |
| 12.7 | 1/2 | 3.2 | 1/8 | 902.0127.032 | 902.0127.I32 | - |
| 15.9 | 5/8 | 3.2 | 1/8 | 902.0159.032 | 902.0159.I32 | - |
| 8.0 | - | 4.0 | - | 902.0080.040 | 902.0080.I40 | - |
| 12.0 | - | 4.0 | - | 902.0120.040 | 902.0120.I40 | - |
| 16.0 | - | 4.0 | - | 902.0160.040 | 902.0160.I40 | - |
| 9.6 | 3/8 | 4.8 | 3/16 | 902.0096.048 | 902.0096.I48 | - |
| 12.7 | 1/2 | 4.8 | 3/16 | 902.0127.048 | 902.0127.I48 | - |
| 15.9 | 5/8 | 4.8 | 3/16 | 902.0159.048 | 902.0159.I48 | - |
| 19.0 | 3/4 | 4.8 | 3/16 | 902.0190.048 | 902.0190.I48 | - |
| 25.4 | 1 | 4.8 | 3/16 | 902.0254.048 | 902.0254.I48 | - |
Recommended Products
-
![530 process pumps]()
-
![630 mid-flow process pumps]()
630 mid-flow process pumps
Flow rates to 18 L/min (4.76 USGPM) and pressures up to 4 bar (60 psi). Precise 2,650:1 speed control range.
Pumps - cased pumps
-
![730 process pumps]()
730 process pumps
Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.
Pumps - cased pumps
Our tubing specialists are here to help you succeed.
To order a product or ask a question