Pumps - cased pumps

问dos metering pump

Arrange a demo
Arrange a demo

Overview

问dos chemical metering pumps

Delivering flow rates that remain constant right up to 7 bar Qdos peristaltic chemical metering pumps give users a unique advantage over diaphragm metering pumps.

问dos pumps offer long maintenance intervals - reducing the impact of process downtime and lowering the overall cost of ownership.

Eliminate ancillary equipment

A diaphragm metering pump often requires a range of high maintenance ancillary items to function.

问dos pumps eliminate the need for ancillary equipment while ensuring accurate, linear and repeatable metering across all process conditions.

Chemical compatibility guide

Features and benefits

  • Cut chemical cost through higher accuracy metering
  • Simple drop-in installation eliminates ancillary equipment
  • Reduced maintenance with single, no-tools, component replacement
  • Cost of ownership is less than that of a diaphragm pump
  • Flow rates from 0.1 to 2,000 ml/min at up to 7 bar
  • No backpressure valves, pulsation dampener, degassing valves, foot valves, strainers or float switches

技术总结

Max. flow rate 2000 ml/min
Min. flow rate 0.1 ml/min
Min. flow rate 2 L/min
Max. flow rate 600 L/h
Max. flow rate 158.5 usgph
Min. flow rate 0.001 usgph
Max. operating pressure 7 bar
Max. operating pressure 100 psi
Ambient Temperature Range 4 – 45
Ambient Temperature Range 39 – 113
Control types EtherNet/IP™, Manual, Profibus, Profinet®, Remote, Universal, Universal relay, Universal+, Universal+ relay
Standards CE, cETLus, CSA, C-Tick, IRAM S Mark, NSF 61
Ingress rating IP66, NEMA 4X
Power supply 100-240 VAC 50-60 Hz 190 VA, 12-24 V DC

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Share

表演

问dos 20 performance

qdos qdos remote
Speed (rpm) Flow ml/min (USGPH)* Speed (rpm) Flow ml/min(USGPH)*
qdos 20 0.017-55 0.1-333 (0.001-5.3) 0.034-55 0.2-333 (0.003-5.3)
qdos 20 PU 0.017-55 0.1-484 (0.001–7.67) NA NA
qdos 30 0.025-125 0.1-500 (0.001-7.93) 0.078-125 0.3-500 (0.005-7.93)
qdos 60 0.013-125 0.1-1000 (0.001-15.85) 0.078-125 0.6-1000 (0.01-15.85)
qdos 120 0.006-140 0.1-2000 (0.001-31.7) 0.078-125 1.25-2000 (0.02-31.7)

*accuracy ±1%, repeatability ±0.5%

问dos 30 performance

qdos qdos remote
Speed (rpm) Flow ml/min (USGPH)* Speed (rpm) Flow ml/min(USGPH)*
qdos 30 0.025-125 0.1-500 (0.001-7.93) 0.078-125 0.3-500 (0.005-7.93)

*accuracy ±1%, repeatability ±0.5%

问dos 60 performance

qdos qdos remote
Speed (rpm) Flow ml/min (USGPH)* Speed (rpm) Flow ml/min(USGPH)*
qdos 60 0.013-125 0.1-1000 (0.001-15.85) 0.078-125 0.6-1000 (0.01-15.85)
qdos 60 PU 0.013-125 0.1-1000 (0.001-15.85) 0.078-125 0.6-1000 (0.01-15.85)

*accuracy ±1%, repeatability ±0.5%

问dos 120 performance

qdos qdos remote
Speed (rpm) Flow ml/min (USGPH)* Speed (rpm) Flow ml/min(USGPH)*
qdos 120 0.006-140 0.1-2000 (0.001-31.7) 0.078-125 1.25-2000 (0.02-31.7)

*accuracy ±1%, repeatability ±0.5%

Specifications

Technical specifications

问dos 20 问dos 30 问dos 60 问dos 120
Max. flow rate 484 ml/min 500 ml/min 1000 ml/min 2000 ml/min
Min. flow rate 0.1 ml/min 0.1 ml/min 0.1 ml/min 0.1 ml/min
Max. flow rate 7.67 usgph 7.93 usgph 15.85 usgph 31.7 usgph
Min. flow rate 0.001 usgph 0.001 usgph 0.001 usgph 0.001 usgph
Max. operating pressure 7 bar 7 bar 7 bar 4 bar
Max. operating pressure 100 psi 100 psi 100 psi 60 psi
Max. operating speed 55 rpm 125 rpm 125 rpm 140 rpm
Ambient Temperature Range 5 – 40 5 – 45 5 – 45 5 – 45
Ambient Temperature Range 41 – 104 41 – 113 41 – 113 41 – 113
Weight 5.7 kg 5.05 kg 5.7 kg 5.7 kg
Weight 12.6 lbs 11.1 lbs 12.6 lbs 12.6 lbs
Control types EtherNet/IP™, Manual, Profibus, Profinet®, Remote, Universal, Universal relay, Universal+, Universal+ relay EtherNet/IP™, Manual, Profibus, Profinet®, Remote, Universal, Universal relay, Universal+, Universal+ relay EtherNet/IP™, Manual, Profibus, Profinet®, Remote, Universal, Universal relay, Universal+, Universal+ relay EtherNet/IP™, Manual, Profibus, Profinet®, Remote, Universal, Universal relay, Universal+, Universal+ relay
Standards CE, cETLus, CSA, C-Tick, IRAM S Mark, NSF 61 CE, cETLus, CSA, C-Tick, IRAM S Mark, NSF 61 CE, cETLus, CSA, C-Tick, IRAM S Mark, NSF 61 CE, cETLus, CSA, C-Tick, IRAM S Mark, NSF 61
Ingress rating IP66, NEMA 4X IP66, NEMA 4X IP66, NEMA 4X IP66, NEMA 4X
Humidity 80% up to 31°C, 88°F, decreasing linearly to 50% at 40°C, 104°F 80% up to 31°C, 88°F, decreasing linearly to 50% at 40°C, 104°F 80% up to 31°C, 88°F, decreasing linearly to 50% at 40°C, 104°F 80% up to 31°C, 88°F, decreasing linearly to 50% at 40°C, 104°F
Noise < 70dB(A) at 1m < 70dB(A) at 1m < 70dB(A) at 1m < 70dB(A) at 1m
Max. altitude 2000 2000 2000 2000
Power supply 100-240 VAC 50-60 Hz 190 VA, 12-24 V DC 100-240 VAC 50-60 Hz 190 VA, 12-24 V DC 100-240 VAC 50-60 Hz 190 VA, 12-24 V DC 100-240 VAC 50-60 Hz 190 VA, 12-24 V DC

Min. flow depends upon model, flow unit and method of control

Some pumphead tube variants will limit the maximum pressure to 4 bar

问dos 20 dimensions

Model A B C D E F G H I
qdos 20 234mm (9.2”) 214mm (8.4”) 104.8mm (4.1”) 266mm (10.5”) 43mm (1.7”) 173mm (6.8”) 40mm (1.6”) 140mm (5.5”) 10mm (0.4”)
*Optional relay module

问dos 30 dimensions

Model A B C D E F G H I
qdos 30 234mm (9.2”) 214mm (8.4”) 71.5mm (2.8”) 233mm (9.2”) 43mm (1.7”) 173mm (6.8”) 40mm (1.6”) 140mm (5.5”) 10mm (0.4”)
*Optional relay module

问dos 60 dimensions

Model A B C D E F G H I
qdos 60 234mm (9.2”) 214mm (8.4”) 104.8mm (4.1”) 266mm (10.5”) 43mm (1.7”) 173mm (6.8”) 40mm (1.6”) 140mm (5.5”) 10mm (0.4”)
*Optional relay module

问dos 120 dimensions

Model A B C D E F G H I
qdos 120 234mm (9.2”) 214mm (8.4”) 104.8mm (4.1”) 266mm (10.5”) 43mm (1.7”) 173mm (6.8”) 40mm (1.6”) 140mm (5.5”) 10mm (0.4”)
*Optional relay module

Materials of construction

Bearings Stainless steel, Steel
Drive shaft Stainless steel 440C
Drive casework 20% glass filled PPE/PS
Drive casework coating 20% glass filled PPE/PS
Hydraulic connectors Polypropylene, PVDF
Keypad/HMI Polyester
Lubricant PFPE based
Pumphead body assembly 30% glass filled PPO/PS, 40% glass filled PPS
Pumphead rotor assembly Glass filled Nylon, PP (polypropylene)
Tubing PU, Santoprene, SEBS

Information listed covers the complete range. For detailed specifications of individual models/components refer to user manual or contact WMFTS representative.

Control

Control options

Operational modes Manual Remote PROFIBUS Universal Universal+
Manual ✔ ✔ ✔ ✔
PROFIBUS—bus speed 9.6–1,500 kb/s ✔
Contact ✔ ✔
4-20mA ✔ ✔ ✔
Fault reporting ✔ ✔ ✔ ✔ ✔
Features Manual Remote PROFIBUS Universal Universal+
Numerical flow display ✔ ✔ ✔ ✔
Numerical speed display ✔ ✔ ✔ ✔
Fluid level monitor ✔ ✔ ✔ ✔
Max (prime) ✔ ✔ ✔ ✔
Auto restart (after power restored) ✔ ✔ ✔ ✔ ✔
Fluid recovery ✔ ✔ ✔ ✔
Leak detection ✔ ✔ ✔ ✔ ✔
3.5” (88.9mm) colour TFT display ✔ ✔ ✔ ✔
LED Pump status icons ✔
Control methods Manual Remote PROFIBUS Universal Universal+
Input/Output Options L L L or R L or R
Manual control capability ✔ ✔ ✔ ✔
4-20mA input ✔ ✔ ✔
4-20mA input two point calibration ✔
4-20mA output ✔ ✔
Contact input (pulse/batch) L or R L or R
Manual speed adjustment range 3333:1 (Qdos 20)
5000:1 (Qdos 30)
10000:1 (Qdos 60)
20000:1 (Qdos 120)		 3333:1 (Qdos 20)
5000:1 (Qdos 30)
10000:1 (Qdos 60)
20000:1 (Qdos 120)		 3333:1 (Qdos 20)
5000:1 (Qdos 30)
10000:1 (Qdos 60)
20000:1 (Qdos 120)		 3333:1 (Qdos 20)
5000:1 (Qdos 30)
10000:1 (Qdos 60)
20000:1 (Qdos 120)
Minimum motor adjustment speed increment
(Dependent upon the operating mode and chosen flow unit)		 0.006 0.078 0.100 0.003 0.003
4-20mA resolution 1600:1 1600:1 1600:1
Profibus speed resolution 550:1 (Qdos 20)
1250:1 (Qdos 30)
1250:1 Qdos 60
1400:1 (Qdos 120)
Run stop input ✔ ✔ ✔
Run status output ✔ ✔ L
Alarm output ✔ ✔ L
Four configurable relay outputs R
Remote fluid recovery ✔ ✔ ✔
PROFIBUS Manual Remote PROFIBUS Universal Universal+
Speed set point ✔
Speed feedback ✔
Flow calibration function ✔
Hours run ✔
Revolution counter ✔
Leak detection ✔
Low fluid level alarm ✔
Diagnostic feedback ✔
Security Manual Remote PROFIBUS Universal Universal+
Keypad lock ✔ ✔ ✔ ✔
PIN lock to protect set up ✔ ✔ ✔ ✔
*Control options - Universal and Universal+ models
Variant Standard pump (L) Relay Module (R)
Input 5–24V DC 5-24V DC or 110V AC
Output Open collector Contact rating 110V AC, 4A 30V DC, 4A

Literature

Brochures

  1. 问dos brochure (EN).pdf
    PDF - 1.2mb

Datasheet

  1. 问dos 20 datasheet (EN).pdf
    PDF - 1.4mb
  2. 问dos 60 datasheet (EN).pdf
    PDF - 1.3mb
  3. Qdos 120数据表(EN) . pdf
    PDF - 1.4mb
  4. 问dos 30 datasheet (EN).pdf
    PDF - 1.4mb

Manuals

  1. 问dos manual (EN).pdf
    PDF - 4.3mb

Other Resources

  1. PROFIBUS (GSD) Qdos 30,60,120 control file.gsd
    GSD - 2.6kb

Pumpheads

Reduced maintenance with single, no-tools, component replacement

Revolutionary ReNu pumphead technology is at the core of the Qdos pump. This ensures the delivery of accurate and repeatable flow for fluids of wide ranging viscosities.

任u pumphead provides accurate, linear and repeatable low pulse flow under varying process conditions.

Safe, no tools maintenance. The ReNu pumphead has an integral leak detector which eliminates operator exposure to chemicals.

问dos pumps can be ordered with the ReNu pumphead mounted on the left or right of the pump.

Pumphead Tube material Max operating pressure Part number
任u 20

SEBS

Optimised for sodium hypochlorite applications with discharge pressure from 60 to 100 psi

Food-grade compliance: FDA regulations 21 CFR177.1680 and EC1935/2004, EU regulation 10/2011

 7 bar 0M3.1800.PFP

PU

Optimised for polymers with discharge pressureup to 4 bar. Please see the chemical compatibility section for further information on suitability with other specific chemicals

Food-grade compliance: FDA regulations 21 CFR177.1680 and EC1935/2004, EU regulation 10/2011

 4 bar 0M3.1500.PFP
任u 30

Santoprene

A general purpose pumphead with a high chemical compatibility across a range of applications

Food-grade compliance: FDA regulations 21 CFR177.1680

 7 bar 0M3.2200.PFP

SEBS

Optimised for sodium hypochlorite, sulfuric acid and hydrogen peroxide applications with discharge pressure up to 4 bar. Please see the chemical compatibility section for further information on suitability with other specific chemicals

Food-grade compliance: FDA regulations 21 CFR177.1680 and EC1935/2004, EU regulation 10/2011

 4 bar 0M3.2800.PFP
任u 60

Santoprene

A general purpose pumphead with a high chemical compatibility across a range of applications

Food-grade compliance: FDA regulations 21 CFR177.1680

 7 bar 0M3.3200.PFP

SEBS

Optimised for sodium hypochlorite, sulfuric acid and hydrogen peroxide applications with discharge pressure up to 4 bar. Please see the chemical compatibility section for further information on suitability with other specific chemicals

Food-grade compliance: FDA regulations 21 CFR177.1680 and EC1935/2004, EU regulation 10/2011

 4 bar 0M3.3800.PFP

PU

Optimised for polymers with discharge pressure up to 5 bar. Please see the chemical compatibility section for further information on suitability with other specific chemicals.

Food-grade compliance: FDA regulations 21 CFR177.1680 and EC1935/2004, EU regulation 10/2011

 5 bar 0M3.3500.PFP
120年雷努

Santoprene

A general purpose pumphead with a high chemical compatibility across a range of applications

 4 bar 0M3.4200.PFP

Videos

Order Information

产品codes

问dos 20 product codes

Description Partcode
任u 20 pumphead PU / PFPE 4 bar (60psi) 0M3.1500.PFP
任u 20 pumphead SEBS / PFPE 7 bar (100psi) 0M3.1800.PFP
任u 30 CWT pumphead EPDM / PEEK / PFPE 7 bar (100 psi) 0M3.5700.PFP
任u 30 pumphead Santoprene / PFPE 7 bar (100psi) 0M3.2200.PFP
任u 30 pumphead SEBS / PFPE 4 bar (60psi) 0M3.2800.PFP
任u 60 pumphead Santoprene / PFPE 7 bar (100psi) 0M3.3200.PFP
任u 60 pumphead SEBS / PFPE 4 bar (60psi) 0M3.3800.PFP
120年雷努pumphead Santoprene / PFPE 4 bar (60psi) 0M3.4200.PFP
Hydraulic connection pack, polypropylene compression fittings—Set of four sizes : 6.3x11.5mm, 10x16mm, 9x12mm, 5x8mm for use with WM Interface tubing. 0M9.221H.P01
Hydraulic connection pack, polypropylene barb/threaded fittings, 1/4” hose barb, 3/8” hose barb, 1/4” BSP, 1/4” NPT 0M9.221H.P02
Hydraulic connection pack, PVDF barb/threaded fittings, 1/4” hose barb, 3/8” hose barb, 1/4” BSP, 1/4” NPT 0M9.221H.F02
Hydraulic connection pack, polypropylene, threaded fittings, 1/2” BSP (Only for ReNu 20, ReNu 60, ReNu 120 pumpheads. Not available for ReNu 30 pumpheads) 0M9.401H.P03
Hydraulic connection pack, polypropylene, threaded fittings, 1/2” NPT (Only for ReNu 20, ReNu 60, ReNu 120 pumpheads. Not available for ReNu 30 pumpheads) 0M9.401H.P04
Hydraulic connection pack, polypropylene, 1/2” hose barb 0M9.401H.P05
Hydraulic connection pack, PVDF, threaded fittings, 1/2” BSP (Only for ReNu 20, ReNu 60, ReNu 120 pumpheads. Not available for ReNu 30 pumpheads) 0M9.401H.F03
Hydraulic connection pack, PVDF, threaded fittings, 1/2” NPT (Only ReNu 20, ReNu 60, ReNu 120 pumpheads. Not available for ReNu 30 pumpheads) 0M9.401H.F04
Hydraulic connection pack, PVDF, 1/2” hose barb 0M9.401H.F05
Interface tubing, pvc 6.3x11.5mm, 2m (6.5ft) length 0M9.2222.V6B
10 x16mm接口管,pvc,长度2米(6.5英尺) 0M9.2222.VAD
Interface tubing, pvc 6.3x11.5mm, 5m (16ft) length 0M9.2225.V6B
Interface tubing, pvc 10x16mm, 5m (16ft) length 0M9.2225.VAD
Interface tubing, polyethylene 9x12mm, 2m (6.5ft) length 0M9.2222.E9C
Interface tubing, polyethylene 5x8mm, 2m (6.5ft) length 0M9.2222.E58
Interface tubing, polyethylene 9x12mm, 5m (16ft) length 0M9.2225.E9C
Interface tubing, polyethylene 5x8mm, 5m (16ft) length 0M9.2225.E58
Replacement baseplate 0M9.223M.X00
Input lead, M12 IP66, 3m (10ft) length 0M9.203X.000
Output lead, M12 IP66, 3m (10ft) length 0M9.203Y.000
HMI protective cover 0M9.203U.000
任u Connection Collar - Qty 2 0M9.001H.P00
任u 30, pack of 2 Viton "O" Rings 0M9.221R.K00
任u 20, ReNu 60, ReNu 120 Santoprene Insert 0M9.001R.M00
问dos 30 pumphead clamp and screw (Pair) 0M9.203C.000

问dos 30 product codes

Description Partcode
任u 30 pumphead Santoprene / PFPE 7 bar (100psi) 0M3.2200.PFP
任u 30 pumphead SEBS / PFPE 4 bar (60psi) 0M3.2800.PFP

问dos 60 product codes

Description Partcode
任u 60 pumphead Santoprene / PFPE 7 bar (100psi) 0M3.3200.PFP
任u 60 pumphead SEBS / PFPE 4 bar (60psi) 0M3.3800.PFP
任u 60 pumphead PU 5 bar (70psi) 0M3.3500.PFP

问dos 120 product codes

Description Partcode
120年雷努pumphead Santoprene / PFPE 4 bar (60psi) 0M3.4200.PFP

Related Products

  1. 530 process pumps

    530 process pumps

    Flow rates to 55 GPH and pressures up to 100 psi. Precise 2200:1 speed control range.

    Pumps - cased pumps

  2. 630 mid-flow process pumps

    630 mid-flow process pumps

    Flow rates to 4.76 GPM and pressures up to 60 psi. Precise 2650:1 speed control range.

    Pumps - cased pumps

Our process pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts