Pumps - hose pumps

Bredel hose pumps (10-50)

Arrange a demo

Overview

Bredel hose pumps (10-50)

Bredel hose pumps have no valves or seals to leak, clog or replace and provide flow rates to 17,520 L/h and pressures to 16 bar.

They can pump viscous and abrasive slurries, pastes and sludge, with up to 80 % solids in suspension.

Unlike other pump types, the highly abrasive nature of grit-filled sludge or lime slurry in the environmental market, does not affect peristaltic hose pump life.

Bredel hose pumps eliminate ancillary equipment such as dry run protection, seal water flush systems and in-line check valves. They are also reversible to flush lines.

Chemical Compatibility Guide

Features and benefits

Dry running and self-priming
Suction lift capability of up to 9.14 m (30 ft)
Abrasion resistant hoses can double pump uptime and save energy
No seals, ball-checks, diaphragms, glands, immersed rotors, stators or pistons to leak, clog, corrode or replace
Handles abrasive slurries, corrosive acids, gaseous liquids
No slippage, allowing true positive displacement for accurate and repeatable metering
No ancillary equipment, check valves, sealing water flush systems or run-dry protection required
Fully reversible to blow out suction and drain lines safely

Technical summary

Max. flow rate continuous	10512 L/h
Max. flow rate continuous	2774 USGPH
Volume per revolution	0.022 - 2.92 L
Max. continuous operating speed	60 - 100转
Max. operating pressure	16 bar
Max. operating pressure	232 psi
Min. starting torque	47 - 620 N m
Min. starting torque	416 - 5,487 in/lbs
Weight	30 - 325 kg

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

Bredel 10 performance

Bredel 15 performance

Bredel 20 performance

Bredel 25 performance

Bredel 32 performance

Bredel 40 performance

Bredel 50 performance

Specifications

Technical specifications

	Bredel 10	Bredel 15	Bredel 20	Bredel 25	Bredel 32	Bredel 40	Bredel 50
Max. flow rate continuous	105 L/h	375 L/h	600 L/h	1800 L/h	3200 L/h	5985升/小时	10512 L/h
Max. flow rate continuous	28 USGPH	99 USGPH	158 USGPH	475 USGPH	844 USGPH	1579 USGPH	2774 USGPH
Max. flow rate intermittent	160 L/h	525 L/h	820 L/h	2740 L/h	5250 L/h	9576 L/h	17520 L/h
Max. flow rate intermittent	42 USGPH	139 USGPH	216 USGPH	723 USGPH	1385 USGPH	2527 USGPH	4623 USGPH
Volume per revolution	0.022 L	0.083 L	0.152 L	0.3 L	0.625 L	1.33 L	2.92 L
Volume per revolution	0.0058 USG	0.0219 USG	0.0402 USG	0.079 USG	0.165 USG	0.35 USG	0.77 USG
Max. continuous operating speed	80 rpm	75 rpm	65 rpm	100 rpm	85 rpm	75 rpm	60 rpm
Max. intermittent operating speed	120 rpm	105 rpm	90 rpm	155 rpm	140转	120 rpm	100 rpm
Max. operating pressure	12 bar	12 bar	10 bar	16 bar	16 bar	16 bar	16 bar
Max. operating pressure	174 psi	174 psi	145 psi	232 psi	232 psi	232 psi	232 psi
Suction pressure	0.05 bar abs	0.05 bar abs	0.05 bar abs	0.05 bar abs	0.05 bar abs	0.05 bar abs
Suction pressure	0.73 psi abs	0.73 psi abs	0.73 psi abs	0.73 psi abs	0.73 psi abs	0.73 psi abs
Max. inlet pressure	2 bar abs	2 bar abs	2 bar abs	3.5 bar abs	3条腹肌	2.5 bar abs	2.5 bar abs
Max. inlet pressure	30 psia	30 psia	30 psia	51 psia	44 psia	38 psia	38 psia
Operating temperature range	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C	-20 to 45 °C
Operating temperature range	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F	-4 to 113 °F
Fluid temperature range	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C	-20 to 80 °C
Fluid temperature range	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F	-4 to 176 °F
Min. starting torque	47 N m	60 N m	85 N m	115 N m	210 N m	320 N m	620 N m
Min. starting torque	416 in/lbs	531 in/lbs	752 in/lbs	1018 in/lbs	1859 in/lbs	2832 in/lbs	5487 in/lbs
Weight	30 kg	45 kg	45 kg	90 kg	130 kg	180 kg	325 kg
Weight	66 lbs	99 lbs	99 lbs	198 lbs	287 lbs	397 lbs	717 lbs
Hose lubricant required	0.25 L	0.5 L	0.5 L	2 L	3.5升	5 L	10 L
Hose lubricant required	0.07 USG	0.1 USG	0.1 USG	0.53 USG	0.92 USG	1.32 USG	2.64 USG
Port configurations	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up
Compatible hose materials	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance	CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance
Flange assembly type	ANSI, DIN	ANSI, DIN	ANSI, DIN	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS

Please consult your Bredel representative for lower or higher temperature operation.

Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

Bredel 10 dimensions

Type	A	A1	B	C	D	ØE	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP
Bredel 10 (mm)	337	311	171	62	116	16	235	265	225	127	254	78	51	501	46	378	150	65	25	12
Bredel 10 (inches)	13.3	12.2	6.7	2.44	4.6	16mm	9.3	10.4	8.9	5.0	10.0	3.1	2	19.7	1.8	14.9	5.9	2.6	1.0	12mm

Connector sizes	MNPT	EN DIN	JIS
Bredel 10	0.5"	10mm	10mm

Bredel 15 dimensions

Type	A	A1	B	C	D	ØE	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP
Bredel 15 (mm)	427	431	230	63	195	20.	285	315	304	167	294	82	61	505	46	378	150	75	25	12
Bredel 15 (inches)	16.8	17.0	9.1	2.5	7.7	20.mm	11.2	12.4	12.0	6.6	11.6	3.2	2.4	19.9	1.8	14.9	5.9	3.0	1.0	12mm

Connector sizes	MNPT	EN DIN	JIS
Bredel 15	0.75"	20.mm	20.mm

Bredel 20 dimensions

Type	A	A1	B	C	D	ØE	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP
Bredel 20 (mm)	427	431	230	63	195	20./25.5*	285	315	304	167	294	82	61	505	46	378	150	75	25	12
Bredel 20 (inches)	16.8	17.0	9.1	2.5	7.7	20.mm/25.5mm*	11.2	12.4	12.0	6.6	11.6	3.2	2.4	19.9	1.8	14.9	5.9	3.0	1.0	12mm

Connector sizes	MNPT	EN DIN	JIS
Bredel 20	0.75"	20.mm	20.mm

Bredel 25 dimensions

Type	A	B	C	D	E	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R
Bredel 25 (mm)	521	304	2.5	264	98	279	315	460	222	359	66	97	592	58	468	305	120	15	12	14	85
Bredel 25 (inches)	20..5	12	0.09	10.4	3.9	11	12.4	18.1	8.7	14.1	2.6	3.8	23.3	2.3	18.4	12	4.7	0.6	0.47	0.6	3.3

Connector sizes	ANSI 150#	EN DIN	JIS
Bredel 25	1"	25mm	25mm

Bredel 32 dimensions

Type	A	B	C	D	E	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R
Bredel 32 (mm)	631	375	2.5	330	105	324	360	538	260	402	72	93	684	68	544	370	120	20.	12	18	100
Bredel 32 (inches)	24.8	14.8	0.09	13	4.1	12.8	14.2	21.2	10.2	15.8	2.8	3.7	26.9	2.7	21.4	14.6	4.7	0.79	0.47	0.71	3.94

Connector sizes	ANSI 150#	EN DIN	JIS
Bredel 32	1.25"/1.5"	32mm	32mm

Bredel 40 dimensions

Type	A	B	C	D	E	F	G	H	H1	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R
Bredel 40 (mm)	705	412	2.5	430	110	490	540	643	325	73	84	906	91	301	300	120	30	18	18	110
Bredel 40 (inches)	27.8	16.2	0.09	16.9	4.3	19.3	21.3	25.3	12.8	2.9	3.3	35.7	3.6	11.9	11.8	4.7	1.2	0.71	0.71	4.3

Connector sizes	ANSI 150#	EN DIN	JIS
Bredel 40	1.5"	40mm	40mm

Bredel 50 dimensions

Type	A	B	C	D	E	F	G	H	H1	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R
Bredel 50 (mm)	838	475	3	554	143	620	680	811	420	84	95	975	112	339	380	155	40	18	18	125
Bredel 50 (inches)	32.9	18.7	0.12	21.8	5.6	24.4	26.8	31.9	16.5	3.3	3.7	38.4	4.4	13.3	15	6.1	1.6	0.71	0.71	4.9

Connector sizes	ANSI 150#	EN DIN	JIS
Bredel 50	2"	50mm	50mm

Materials of construction

Hose material	Bioprene, CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance
Housing	Cast iron, ISO12944 category C4M
Rotor assembly	Cast iron, ISO12944 category C4M
Cover assembly	Cast iron, ISO12944 category C4M
Brackets and fasteners	Galvanised steel, Stainless steel 316
Support frame	Galvanised steel, Stainless steel 316
Hose clamps	Galvanised steel, Stainless steel 316
Coupling brush	Alloy steel
Seals	EPDM, Neoprene, Nitrile