Hose pump accessories

Inlet pulse accumulator

Arrange a demo

Overview

Inlet pulse accumulator

When installed on the suction side, an IPA reduces positive and negative spikes when inlet conditions vary. This results in quieter operation and maximized hose life.

Features and benefits

Reduces positive and negative peaks when inlet conditions vary
Eliminates up to 90 % of the pump inlet pulsation
Provides quieter operation and maximizes hose life
Low maintenance set-up, suitable for any Bredel and APEX pump with hose size from 25 mm to 100 mm
Safe handling

Technical summary

Max. operating pressure	6 bar
Max. operating pressure	87 psi

Specifications

Technical specifications

	IPA 40	IPA 65	IPA 100
Max. operating pressure	6 bar	6 bar	6 bar
Max. operating pressure	87 psi	87 psi	87 psi
Storage temperature range	-40 to 70 °C	-40 to 70 °C	-40 to 70 °C
Storage temperature range	-40 to 158 °F	-40 to 158 °F	-40 to 158 °F
产品temperature range	-10 to 80 °C	-10 to 80 °C	-10 to 80 °C
产品temperature range	14 to 176 °F	14 to 176 °F	14 to 176 °F

IPA 40 dimensions

Dimensions in mm (for DIN/EN flanges)
IPA Type	Pump Type		SS	PVC	DIN/EN			DIN/EN			SS	PVC
		C	H	H	K1	L1	n1 x N1	K2	L2	n2 x N2	R	R
IPA40	APEX28	89	402	396	DN40	110	4 x 18	DN25	85	4 x 14	180	190
IPA40	APEX35	89	402	396	DN40	110	4 x 18	DN32	100	4 x 18	180	190
IPA40	Bredel25	89	402	396	DN40	110	4 x 18	DN25	85	4 x 14	180	190
IPA40	Bredel32	89	402	396	DN40	110	4 x 18	DN32	100	4 x 18	180	190
IPA40	Bredel40	89	402	396	DN40	110	4 x 18	DN40	110	4 x 18	180	190

Dimensions in inches (for ANSI flanges)
IPA Type	Pump Type		SS	PVC	ANSI			ANSI			SS	PVC
		C	H	H	K1	L1	n1 x N1	K2	L2	n2 x N2	R	R
IPA40	APEX28	3.5	15.8	15.6	1 1/2	3 7/8	4 x 5/8	1	3 1/8	4 x 5/8	7.1	7.5
IPA40	APEX35	3.5	15.8	15.6	1 1/2	3 7/8	4 x 5/8	1 1/2	3 7/8	4 x 5/8	7.1	7.5
IPA40	Bredel25	3.5	15.8	15.6	1 1/2	3 7/8	4 x 5/8	1	3 1/8	4 x 5/8	7.1	7.5
IPA40	Bredel32	3.5	15.8	15.6	1 1/2	3 7/8	4 x 5/8	1 1/4	3 1/2	4 x 5/8	7.1	7.5
IPA40	Bredel40	3.5	15.8	15.6	1 1/2	3 7/8	4 x 5/8	1 1/2	3 7/8	4 x 5/8	7.1	7.5

IPA 65 dimensions

Dimensions in mm (for DIN/EN flanges)
IPA Type	Pump Type		SS	PVC	DIN/EN			DIN/EN			SS	PVC
		C	H	H	K1	L1	n1 x N1	K2	L2	n2 x N2	R	R
IPA65	Bredel50	108	511	513	DN65	145	8 x 18*	DN50	125	4 x 18	212	270
IPA65	Bredel65	108	694	696	DN65	145	8 x 18*	DN65	145	8 x 18*	212	270

Dimensions in inches (for ANSI flanges)
IPA Type	Pump Type		SS	PVC	ANSI			ANSI			SS	PVC
		C	H	H	K1	L1	n1 x N1	K2	L2	n2 x N2	R	R
IPA65	Bredel50	4.3	20.1	20.2	2 1/2	5 1/2	8 x 3/4	2	4 3/4	4 x 3/4	8.3	10.6
IPA65	Bredel65	4.3	27.3	27.4	2 1/2	5 1/2	8 x 3/4	2 1/2	5 1/2	8 x 3/4	8.3	10.6

IPA 100 dimensions

Dimensions in mm (for DIN/EN flanges)
IPA Type	Pump Type		SS	PVC	DIN/EN			DIN/EN			SS	PVC
		C	H	H	K1	L1	n1 x N1	K2	L2	n2 x N2	R	R
IPA100	Bredel80	140	776	791	DN100	180	8 x 18	DN80	160	8 x 18	276	390
IPA100	Bredel100	140	931	946	DN100	180	8 x 18	DN100	180	8 x 18	276	390

Dimensions in inches (for ANSI flanges)
IPA Type	Pump Type		SS	PVC	ANSI			ANSI			SS	PVC
		C	H	H	K1	L1	n1 x N1	K2	L2	n2 x N2	R	R
IPA100	Bredel80	5.5	30.6	31.1	4	7 1/2	8 x 3/4	3	6	8 x 3/4	10.9	15.4
IPA100	Bredel100	5.5	36.7	37.2	4	7 1/2	8 x 3/4	4	7 1/2	8 x 3/4	10.9	15.4

Materials of construction

Hose material	EPDM, NBR, NR
Housing assemblies	PVC, Stainless steel 316
O-ring	NBR
Flange materials	PVC, Stainless steel 316

Literature

Brochures

Bredelpumps (EN).pdf
PDF - 2.2mb

Datasheet

Inlet pulse accumulator datasheet (EN).pdf
PDF - 330.6kb

Manuals

BredelIPA 40, 65, 100 manual (EN).pdf
PDF - 1mb

Order Information

产品codes

IPA 40 product codes

Replacement hose element			Part number
Hose type	Material	Colour code	IPA40/25 IPA40/32 IPA40/40
NR	Natural rubber	Purple	28-IP04004020
NBR	Nitrile rubber	Yellow	28-IP04004040
EPDM	EPDM	Red	28-IP04004075

For ordering please advise:

Flange size and type
Pump size and type
Required material for hose
Required material for T-piece and flanges

For further information on Inlet Pulse Accumulators please contact your Bredel representative.

IPA 65 product codes

Replacement hose element			Part number
Hose type	Material	Colour code	IPA65/50	IPA65/65
NR	Natural rubber	Purple	28-IP06505020	28-IP06506520
NBR	Nitrile rubber	Yellow	28-IP06505040	28-IP06506540
EPDM	EPDM	Red	28-IP06505075	28-IP06506575

For ordering please advise:

Flange size and type
Pump size and type
Required material for hose
Required material for T-piece and flanges

For further information on Inlet Pulse Accumulators please contact your Bredel representative.

IPA 100 product codes

Replacement hose element			Part number
Hose type	Material	Colour code	IPA100/80	IPA100/100
NR	Natural rubber	Purple	28-IP10008020	28-IP10010020
NBR	Nitrile rubber	Yellow	28-IP10008040	28-IP10010040
EPDM	EPDM	Red	28-IP10008075	28-IP10010075