油管,蠕动

Maxthane tubing elements

Order a sample

Overview

Maxthane tubing elements

Maxthane is the perfect choice for peristaltic dosing and metering applications. Fully recyclable thermoplastic polyurethane construction achieves high-performance pumping with reduced environmental impact. The quick-change Loadsure element design ensures easy changeover. The tubing elements are compatible with all types of vegetable oil and CIP chemicals.

Food-grade compliance

FDA regulations 21 CFR177.1680
EC1935/2004, EU 10/2011

Use Maxthane with 505LT and 520RET pumpheads.

Features and benefits

High-performance pumping with reduced environmental impact
Perfect for flavor, color and additive dosing in food manufacturing
Food-grade compliance: FDA regulations 21 CFR177.1680, EC1935/2004, EU 10/2011

Technical summary

Spallation	Very low
Certification	(EU) 10/2011, FDA 21CFR177.1680, Regulation (EC) No 1935/2004
Shelf life	5 years

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Performance

LoadSure^®Elements		Maximum pumping pressure
Bore mm	Bore inch	Bar	psi
3.2	1/8	7	100
6.4	1/4	4	60
9.6	3/8	2	30

Pumping life

The graphs show the pumping life of Maxthane^®LoadSure^®elements for all bore sizes.

Specifications

Technical specifications

	Maxthane
Bore size	3.2 - 9.6 mm
Bore size	0.125 - 0.375 in
Wall thickness	1.6 mm
Wall thickness	0.0625 in
Color	Colorless
Transparency	Transparent
Spallation	Very low
Certification	(EU) 10/2011, FDA 21CFR177.1680, Regulation (EC) No 1935/2004
Operating temperature range	4 to 45 °C
Operating temperature range	39 to 113 °F
Hardness, shore A (5sec)	87
Specific gravity	1.2 g/cm³
UV resistance	Good
Tear B	70 kN/m
Tear B	619,552 ppi
Tear B	4.8 kips/ft
Ultimate tensile strength	460 bar
Ultimate tensile strength	6672 psi
Ultimate tensile strength	46 MPa
Elongation at break	600 %
Tensile stress at 100% elongation	5 MPa
Tensile stress at 100% elongation	725 Psi
Shelf life	5 years
Compatible pumps	530 cased pumps

Test methods—Hardness: ASTM D 2240; Tear B: ISO 34-1B Tear nicked; Specific gravity: ISO 2781; Ultimate tensile strength, Elongation at break, Tensile stress at 100% elongation; ISO 527-2/5A/500; Vicat softening point: ISO 306 (A50); Abrasion resistance: ISO 4649-B. Values reported above are not intended for sales specification and some properties are not routinely measured.

May discolour to a darker shade of yellow with UV exposure.

For occasional use the maximum operating temperature is 65 °C (149 °F).

Do not steam sterilise articles made with thermoplastic polyurethanes—Methylene dianiline can be generated as a result.